HMS 1 & 2

Heavy melting steel (HMS) or heavy melting scrap is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. HMS is typically traded as a blend of 1 and 2, either a premium blend (80/20) or lower grade mixes (70/30) and (60/40). For example, HMS 1 and 2 (80/20) should consist of HMS 1 and 2 in the ratio of 80% (HMS 1) and 20% (HMS 2).

Each grade guarantees a minimum piece thickness: at least 1/4 inch (6.3 mm) for HMS 1, and 1/8 in for HMS 2

HMS 1 and 2 specifications as defined by ISRI (North America’s Institute of Scrap Recycling Industries):

  • ISRI SPEC 200 (HMS 1) – Wrought iron and/or steel scrap 1/4 inch and larger in thickness. All pieces must be smaller than 60×24 in.

  • ISRI SPEC 201 (HMS 1) – Same as ISRI 200 except pieces must be smaller than 36×18 in.

  • ISRI SPEC 202 (HMS 1) – Same as ISRI 200 except pieces must be smaller than 60×18 in.

  • ISRI SPEC 203 (HMS 2) – Wrought iron and/or steel scrap, black and galvanized, 1/8 inch and larger in thickness.

  • ISRI SPEC 204 (HMS 2) – Same as ISRI 203 except pieces must be smaller than 36×18 in.

  • ISRI SPEC 205 (HMS 2) – Same as ISRI 204 except it may contain automotive scrap, except for thin guage material.

  • ISRI SPEC 206 (HMS 2) – Same as ISRI 205 except pieces must be smaller than 60×18 in.

 

COPPER & COPPER CATHODE

We could supply the copper scrap with high quality and competitive price. 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could meet customers need. Application: Electrical, light industry, machinery,national defense industry . Copper Scrap is industry a important sources of the raw materials, all kinds of can be recycled Recycling waste production with copper. Product Specs Type: Copper wire Cable / copper Bars / copper sheets / copper granules Purity: 99.9% MIN Grade: Grade A Advantage : High purity, very clean, enough stock

Copper cathode details

  • Product. Copper Cathodes Grade A (Electrolytic Copper Grade) ...

  • Dimension. 914mm x 914mm x 12mm (approx.) ( ...

  • Weight of each sheet. 125 kg (+/- 1%)

  • Net Weight of each pallet. 2mt (metric ton) (+/- 1%)

  • Min. Weight of each container. ...

  • Gross Weight of each container. 22.20mt (approx.)

  • Packaging. Palletized (Banded by Aluminium Bands)

 

ALUMINIUM SCRAP & UBC

Tape: according to the purity of aluminum, we can supply aluminum scrap with purity of aluminum 97%, 95%, 84%.

 

Specification of Aluminum scrap 6063

 

Si  : 0.2-0.6%

 

Fe : 0.35%

 

Cu : 0.1%

 

Mn :0.1%

 

Mg : 0.45-0.9%

 

Cr :0.1%

 

Zn :0.1%

Aluminium recycling is the process by which scrap aluminium can be reused in products after its initial production. ... Used beverage containers are the largest component of processed aluminum scrap, and most of it is manufactured back into aluminium cans.

 

ALUMINIUM INGOTS

Our aluminum alloy ingots act as a raw material which is used in automobiles, electrical & pressure die casting industries etc. There exist various alloys ingots like lm6, alsi132 and many more with us. Furthermore, our aluminum ingots are available at very nominal cost.

Product Details:

  • Form: Aluminium

  • Brand: jsk

  • Anodised: Yes

  • Is It Anodised: Anodised

  • Color: Silver, Grey

  • Size: Customized

We supply premium quality aluminium ingots that are free from any sort of impurities and widely used for resistance to varied temperature and enhanced durability. Highly acclaimed for its qualitative features, these are widely used across petroleum, oil, chemical and marine industries. Range of Aluminium Ingots offered by us includes:

  • Aluminum Alloy Ingots: ADC12

  • Secondary Aluminum Ingots: 97% pure

  • Electrolytic / Primary Grade: 99% pure aluminum ingots

 

USED RAILS

The chemical composition is the standard for R50 & R65 rails, original weight 50 pounds per yard or heavier, 6 meters long and over. Material to be suitable for re-rolling into bars and shapes. Free from bent and twisted Rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of a piece of rail. Free from fluff, non-ferrous inclusions excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances and coatings any organic waste, any other harmful substances. Dirt, dust, rust, fluff and other impurities not allowed over 5%.

ISRI-CODES:

(27) Rail, steel No.1 – Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28a) Rail, steel No.2 – Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under.

(28b) Rail, steel No.2 – Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under.

(28c) Rail, steel No.2 – Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under.

(29) Rail, steel No.3 – Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind.

 

NOMINAL CHEMICAL COMPOSITION

Carbon (C) 0.20% to 0.60%
Manganese (Mn) 0.60% to 0.90%
Silicon (Si)0.15% to 0.35%
Sulphur (S) 0.05% to Maximum
Phosphorous (P) 0.05% to Maximum
Arsenic (Ar) 0.15% to Maximum

 

NOMINAL SPECIFICATION FOR R50 – 51.67 KG/M GOST 7173-75

Carbon (C) 0.40% to 0.58%
Manganese (Mn) 0.75% to 0.88%
Silicon (Si) 0.13% to 0.28%
Sulphur (S) 0.045% to Maximum
Phosphorous (P) 0.035% to Maximum
Arsenic (Ar) 0.13% to Maximum

 

NOMINAL SPECIFICATION FOR R65 – 64.72 KG/M GOST 8165-75

Carbon (C) 0.40% to 0.58%
Manganese (Mn) 0.75% to 0.88%
Silicon (Si)0.13% to 0.28%
Sulphur (S) 0.045% to Maximum
Phosphorous (P) 0.035% to Maximum
Arsenic (Ar) 0.13% to Maximum

 

CAST IRON

Jsk Pvt Limited is a client-centric firm offering 100% pure and well-packed Industrial Scrap. We are an eminent Supplier and Exporter of the Industrial Scrap & Ferrous & Non Ferrous Scrap. Our remarkable range of Industrial Scrap is inclusive of Metal Scrap Aluminum Dross . All our Industrial Scraps are being procured from the trusted vendors of the market. Our Industrial Scraps are tested on various parameters before the final delivery.

Jsk Pvt Limited is a client-centric firm offering 100% pure and well-packed Industrial Scrap. We are an eminent Supplier and Exporter of the Industrial Scrap & Ferrous & Non Ferrous Scrap. Our remarkable range of Industrial Scrap is inclusive of Metal Scrap Aluminum Dross . All our Industrial Scraps are being procured from the trusted vendors of the market. Our Industrial Scraps are tested on various parameters before the final delivery.

© 2020 by JSK Global

Created by RAM MEDIA.